Optics Mounting Service | Conrad and Sons Guns
Optics Mounting Service
Conrad and Sons Guns | conradguns.com
Mounted right. Torqued right. Zeroed right. The first time.
A quality optic is only as good as the mount it sits on. An improperly installed scope or red dot can shift under recoil, fail to hold zero, or damage your firearm and optic over time. At Conrad and Sons Guns, our professional optics mounting service ensures every optic is installed correctly — with proper ring alignment, torqued fasteners, and a confirmed bore sight — so you can hit the range or the field with confidence from the very first round.
Service at a Glance
Turnaround
Same Day
Most installs completed while you wait or within 24 hours
Drop-Off Hours
Mon – Sat
9:00 AM – 6:00 PM CT
Optics Accepted
All Brands & Types
Scopes, red dots, LPVOs, reflex sights, and more
Appointments
Walk-Ins Welcome
Call ahead for multiple firearms
Payment
Due at Pick-Up
Cash, credit, and debit accepted
Contact
636-229-1966
sales@conradguns.com
Why Professional Mounting Matters
Many shooters underestimate how much a poor optics installation affects accuracy and reliability. Even a small mistake during mounting — overtorqued rings, misaligned bases, improper eye relief, or a canted reticle — can cost you precision and potentially damage a several-hundred-dollar optic. Professional installation ensures:
Consistent zero that holds under recoilProper eye relief for your shooting positionLevel reticle with no cantCorrect torque on all fastenersNo damage to optic tube or scope bodyOptimal mount height for your firearm and use caseConfirmed bore sight before you leavePeace of mind knowing the job was done right
Mounting Packages
We offer three service tiers depending on the complexity of your optics setup and the level of detail you need.
Standard
Basic Mount & Bore Sight
Starting at $30 per optic
- Mount installation on existing rail or base
- Ring installation and torque to spec
- Eye relief and reticle level adjustment
- Bore sight to paper at 25 yards
- Function and security check
Ideal for red dots, reflex sights, and simple scope setups on standard rails.
Most Popular
Full Mount & Zero
Starting at $60 per optic
- Everything in Basic Mount & Bore Sight
- Base or rail installation if needed
- Ring lapping for maximum contact (where applicable)
- Precise reticle leveling with tools
- Confirmed zero at your preferred distance
- Elevation and windage adjustment documented
- Thread locker applied to fasteners where appropriate
Recommended for hunting rifles, precision rifles, and LPVOs.
Premium
Precision Build & Setup
Starting at $100 per optic
- Everything in Full Mount & Zero
- Scope level system installation
- Cant and parallelism verification
- Co-witnessing setup for backup irons
- Accessory mounting (lights, lasers, magnifiers)
- Detailed written setup record provided
- Long-range zero and drop chart consultation
Best for precision shooting builds, competition rifles, and NV/thermal setups.
Pricing Note
Starting prices apply to standard configurations with an existing Picatinny or Weaver rail. Firearms requiring a drilled-and-tapped base installation, proprietary rail systems, or specialty rings may be quoted at a higher rate. All pricing is confirmed before work begins — no surprises.
Optics We Mount
| Optic Type | Examples | Compatible Firearms |
|---|---|---|
| Rifle Scopes | Vortex, Leupold, Nightforce, Burris, Bushnell, Nikon, Primary Arms | Bolt-action, semi-auto, lever-action rifles |
| Low Power Variable Optics (LPVO) | Vortex Strike Eagle, Leupold VX-Freedom, Primary Arms GLx, Sig Tango6T | AR-15/M4 platform, AK, semi-auto rifles |
| Red Dot Sights | Aimpoint, Holosun, Trijicon MRO, Sig Romeo, Vortex Crossfire | Rifles, shotguns, pistols with optics-ready slides |
| Reflex & Holographic Sights | EOTech EXPS, Holosun HS510C, Vortex Spitfire | AR-platform rifles, tactical shotguns |
| Pistol Red Dots (RDS) | Trijicon RMR, Holosun 507C/508T, Shield RMSc, Sig Romeo Zero | Optics-ready (OR) pistol slides |
| Magnifiers | Vortex VMX-3T, Holosun HM3X, EOTech G33 | Paired with red dots on AR-platform rifles |
| Night Vision / Thermal Mounts | ATN, Pulsar, FLIR, Sightmark | Rifles with Picatinny rails; call ahead for specialty setups |
| Scout Scopes | Forward-mounted long eye relief scopes | Scout rifles, lever-action, bolt-action with forward bases |
What Every Installation Includes
Regardless of package, every optics mounting service at Conrad and Sons Guns includes the following as standard:
Rail and base compatibility checkRing height selection for proper clearanceReticle level verificationFastener torque to manufacturer specificationEye relief set for shooter’s positionBore sight confirmation before returnOptic and mount security checkPost-install function test on the firearm
Add-On Services
| Add-On | Description | Starting Price |
|---|---|---|
| Base / Rail Installation | Drilled-and-tapped scope base installation on rifles without an existing rail. Includes torque and alignment. | Starting at $25 |
| Ring Lapping | Precision lapping of scope rings to maximize contact surface and reduce stress on the scope tube. | Starting at $20 |
| Iron Sight Co-Witness Setup | Alignment of backup iron sights (BUIS) to co-witness with your mounted optic. | Starting at $20 |
| Pistol Optic Cut Verification | Verify slide cut compatibility and install pistol red dot with correct adapter plate and torque spec. | Starting at $25 |
| Magnifier Mount & Flip Setup | Mount and align a flip-to-side magnifier with an existing red dot or holographic sight. | Starting at $25 |
| Accessory Rail Mounting | Installation of lights, lasers, vertical grips, or other rail-mounted accessories. | Starting at $15 per item |
| Scope Level System | Installation and calibration of a scope-mounted bubble level or anti-cant device. | Starting at $15 |
How It Works
- Bring your firearm and optic. Bring the unloaded firearm, your optic, and all mounting hardware (rings, base, screws). If you purchased your optic from us, we will have everything needed. Not sure what hardware you need? Call ahead and we will help.
- We review your setup. Our technician will evaluate your firearm’s rail system, the optic, and your intended use to confirm hardware compatibility and select the optimal ring height and mount configuration.
- We confirm the price. Pricing is reviewed and confirmed before we begin. Any additional hardware needed will be discussed with you upfront.
- Professional installation. Your optic is installed using precision torque drivers, leveling tools, and manufacturer torque specifications. No guesswork — every fastener is properly secured.
- Bore sight and verification. Every install is bore sighted before it leaves the bench so you are on paper quickly at the range. Confirmed zero packages include live-fire zero verification.
- Pick up and go. We walk you through the completed installation, show you your adjustments, and send you out ready to shoot.
Don’t Have Rings or a Base Yet?
No problem. We stock a wide selection of rings, bases, mounts, and mounting hardware in-store. Our staff can help you select the right hardware for your firearm and optic combination before your installation appointment. Stop in or call us at 636-229-1966 to check current inventory.
Frequently Asked Questions
Do I need to bring anything other than my firearm and optic?
Bring your unloaded firearm and your optic. If you already have rings, bases, or mounting hardware, bring those as well. If you are unsure what hardware you need, we can help you select the correct components in-store. Bring any tools or manuals that came with the optic if available.
Can you mount an optic on a pistol?
Yes, provided the pistol has an optics-ready (OR) slide with a compatible cut. We will verify compatibility before installation. If your slide requires an adapter plate for your specific optic footprint, we will source or supply the correct plate. Slide milling for non-optics-ready pistols is not a service we offer at this time.
Do you zero the optic at the range?
Our Full Mount & Zero and Precision Build packages include a confirmed zero. We bore sight all installs as a minimum standard. Live-fire zeroing is performed at our designated range. If you prefer to zero yourself, we will bore sight the optic and send you out ready to finish zeroing at the distance of your choice.
What if my rings or base don’t fit?
We will catch compatibility issues before the installation begins. If your existing hardware is not compatible with your firearm or optic, we will recommend the correct components and provide a revised quote before proceeding. We will never force incompatible hardware.
Can you mount optics on AR-15 uppers or stripped receivers?
Yes. Bring the upper or the complete rifle — either works. If you are dropping off only an upper, ensure it is unloaded and the bolt carrier group is not present, or notify us at drop-off.
How long does an installation take?
Most standard installations are completed same day, often within 1–2 hours. More complex builds or setups requiring ring lapping, base installation, or confirmed live-fire zero may take until the following business day. We will give you an estimated completion time at drop-off.
Ready to Get Your Optic Mounted?
Walk in during business hours or call ahead — we will have your setup dialed in and ready to shoot.
636-229-1966 | sales@conradguns.com
Monday – Saturday | 9:00 AM – 6:00 PM CT
Contact Us
Have questions about optic compatibility, mounting hardware, or which package is right for your build? We are happy to help before you even walk through the door.
Conrad and Sons Guns
Website: conradguns.com
Email: sales@conradguns.com
Phone: 636-229-1966
Business Hours: Monday through Saturday, 9:00 AM – 6:00 PM Central Time
Optics Mounting Service | Conrad and Sons Guns | conradguns.com
